It's my new robot project Moppy! It's main role is to mop the floor for dust I'm gonna attach a microfiber-cloth at the rear of it. Maybe controlled by a servo that can lift it up and down.
Specs:
Tamiya Tracked Chassis with modifications.
Arduino UNO + Prototype Board.
SN754410 motor driver.
Battery-bank of 3x AAA (gonna change to 3x AA).
2 IR Sensors & 1 Sonar for objects detection.
Pictures:
Any more ideas what I could stick on the bot?
[Bot] Moppy, the dust cleaning Arduino Bot
- Stigern
- Site Admin
- Posts: 159
- Joined: Sat May 28, 2011 8:18 am
- Location: Norway
- Contact:
-
- Moderator
- Posts: 41
- Joined: Mon May 30, 2011 5:04 pm
- Contact:
Re: [Bot] Moppy, the dust cleaning Arduino Bot
What software is used to program this? Had a similar project a few years ago, with a RoboPro set. The software used graphical programming, but I made a quite intricate program for my robot actually
- Stigern
- Site Admin
- Posts: 159
- Joined: Sat May 28, 2011 8:18 am
- Location: Norway
- Contact:
Re: [Bot] Moppy, the dust cleaning Arduino Bot
Teaser wrote:What software is used to program this? Had a similar project a few years ago, with a RoboPro set. The software used graphical programming, but I made a quite intricate program for my robot actually
IT's the Arduino IDE:
Check out www.arduino.cc
Who is online
Users browsing this forum: No registered users and 1 guest