I just took the next step and ordered a real quadcopter, it is a ARF kit thats based on the x525 frame. The contents of the kit looks okay, and I guess for a first time build it’s just a good thing most parts already has been selected for me.
Kit Contents:
– X525 V3 folding frame*1
– KKMulticopter v5.5 *1
– XXD 2212 KV1000 brushless motor*4
– 3.17mm Shaft adapter*4
– GEMFAN Carbon Nylon 90×50″ 9050 9050R CW CCW Propeller *4
– Hobbywing 20A ESC*4
– ESC Connect Board*1
– Heat shink tube*12
– Not assembled,just a kit
I will most likely not be using the KKMulticopter 5.5 board, instead I have a KK2 from Hobbyking on it’s way. It looks much easier for a newbie to understand and setup. As some extras to the kit I also got a few extra props, one screw set, prop savers. I also ordered one extra frame kit!
The receiver I’m gonna use is the Turnigy 9x, and for powering this quad I will be using the lipos listed under here. Of course I will not use both at the same time, but I thought I’d give it a shot with different C ratings and mAh:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18207
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=26453
I’ll try to update this blog with a build log.